Compact & User Friendly
This is a fully automatic water distillation equipment and can be used in research laboratories, hospitals etc. It is manufactured from 3.3 exp borosilicate glass or quartz glass. The distillation has following features :
- Replaceable Silica Sheathed (Quartz) Heater : The horizontal jacket is fitted with removable silica sheathed heater and screw threaded connectors for ease of cleaning.
- Distillate temperature is approx. between 25º to 45º C which is ensured by an efficient condenser.
- The stand is powder coated for rust free operation and lustrous appearance.
- Cooling water from the condenser is re-circulated into the boiling chamber, hence saving energy.
- Screw Threaded Connectors : These are provided for easy plumbing & Installation to avoid any glassware breakage during assembly.
- Fuse is provided for safety in case of voltage fluctuation or short circuit.
- Boiler is provided with Replaceable Constant Level Device for easy draining and cleaning of boiling chamber.
- The front cover is easily removable making the access to the glass parts very easy.
Additional Built-in Safety Features
- Gate Valve : Conserves cooling water wastage in case of power failure.
- Flow Switch : In-built safety feature for the equipment unit shut off in case of cooling water failure.
- Temperature Switch : The boiler is equipped with a safety temperature switch which shuts off the unit if water level in the boiler falls below the heater, thus saving the glass parts from any damages.
- Level Sensor : It shuts off the distillation equipment if the water level in the boiler falls below the heater.
- Reservoir Level Sensor : This helps in automatic working of the water distillation equipment. Depending on the water level in the reservoir it will automatically switch On/Off the equipment, thus saving energy. (Reservoir can also be provided with a storage capacity of 5 ltr, 10 ltr& 20 ltr made of Borosilicate Glass or polypropylene).
Borosilicate Glass
|
|
|
|
|
Output Cap. (approx.) | 2 ltrs/hr | 2 ltrs/hr | 4 ltrs/hr | 4 ltrs/hr |
Stage | Single Stage | Double Stage | Single Stage | Double Stage |
Distillate Quality
pH | 5.5-6.0 | 6.0-7.0 | 5.5-6.0 | 6.0-7.0 |
Conductivity µS/cm | 1.0-2.0 | 0.8-1.0 | 1.0-2.0 | 0.8-1.0 |
Cooling Water Requirement (approx.) | 1.5 ltr/min | 2ltr/min | 2-3ltr/min | 2-4ltr/min |
Power Rating (Total) | 1.5 KW | 3.0 KW | 3.0 KW | 6.0 KW |
Quartz Glass
|
|
|
|
|
Output Cap. (approx.) | 2 ltrs/hr | 2 ltrs/hr | 4 ltrs/hr | 4 ltrs/hr |
Stage | Single Stage | Double Stage | Single Stage | Double Stage |
Distillate Quality
Conductivity µS/cm | 0.5-0.8 | 0.1-0.5 | 0.5-0.8 | 0.1-0.5 |
Cooling Water Requirement (approx.) | 1.5 ltr/min | 2 ltr/min | 2.3ltr/min | 2-4 ltr/min |
Power Rating (Total) | 1.7 KW | 3.5 KW | 3.0 KW | 6.0KW |
**All the parameters are under Standard Test Conditions.
For high purity & low conductivity water we recommend Quartz Water Distillations.
